Spectrum-controls 1746sc-CTR4 User Manual Page 49
- Page / 66
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 5: Ladder Program Examples 49
In order to clear the factored data 0 must be loaded into the Preset / K
Factor, Limit / M Factor and Limit / R Factor registers. After entering 0
into these registers bit 15 of the module Configuration register
must be toggled from 0 to 1 and then back to 0.
There are 4 registers assigned for each Channels output configuration
word. The first register assigned is the channel configuration register.
The next 3 registers are the Preset / K Factor, Limit / M Factor and Limit
/ R Factor registers respectively.
Refer to Page 24 for detailed information regarding the output
configuration registers and their functions.
- LOWMETER 1
- Important Notes 3
- Contents 5
- Overview And Specifications 7
- Chapter 1 7
- Detailed Specifications 8
- Chapter 2 11
- Avoiding Electrostatic 12
- Determining Power 13
- Requirements 13
- Selecting a Rack Slot 13
- Wiring Your Module 15
- 16 ControlLogix 16
- Counter Module 16
- Labeling And Re 18
- Installing The 18
- Terminal Block 18
- (if it is removed) 18
- Your Module 19
- Chapter 3 19
- Module Addressing 20
- Operating Modes 22
- Input Configurations 22
- 26 SLC 500 26
- Channel Configuration, Data 27
- Chapter 4 27
- 28 SLC 500 28
- One Second Average of Periods 30
- One Period 31
- -32K-8M +8M 33
- Normal Extended 33
- Extended Normal 33
- Output Register - Scale 34
- Counter Limit / M FactorO:e.y 35
- Rate Limit / R FactorO:e.z 36
- Input Registers 37
- Channel Data 37
- Rate Input Value 38
- Check each input 39
- 40 SLC 500 40
- 42 SLC 500 42
- -32K-8M -8M 43
- Ring Counter 44
- Rollover 45
- Flag Set 45
- Revolution 45
- Detector #1 47
- Detector #2 47
- Displacer 47
- Application Note: 48
- Factor Data Errors 48
- 50 SLC 500 50
- Testing Your Module 51
- Chapter 6 51
- Disconnecting Prime 52
- Powering Up 52
- Interpreting The LED 53
- Indicators 53
- Operation 53
- No Signal 54
- Troubleshooting 55
- 56 SLC 500 56
- Maintaining Your Module 57
- And Ensuring Safety 57
- Chapter 7 57
- Floating Point Rate Mode 59
- Appendix A 59
- Input Registers - Channel 60
- Counter Input Low 61
- Ladder Logic 62
- 64 SLC 500 64
- Getting Technical 65
- Assistance 65
- Declaration of 65
- Conformity 65
Related products and manuals for Measuring instruments Spectrum-controls 1746sc-CTR4
(58 pages)Cisco Systems OL-8131-01 manuales
Manuales del propietario y guías del usuario para Teléfonos Ip Cisco Systems OL-8131-01.
Ofrecemos 1 manuales en pdf Cisco Systems OL-8131-01 para descargar gratis por tipos de documentos: Manual de usuario
Comments to this Manuals